Login to the 2Wire 2701HGV-W Router

Here you will find a guide for login to 2Wire 2701HGV-W Router.

  1. 2Wire 2701HGV-W Router
  2. Manual for 2Wire 2701HGV-W Router
  3. Reset 2Wire 2701HGV-W Router
  4. 2Wire 2701HGV-W Factory Settings
Step 1:

Open 2Wire 2701HGV-W Рутер

The first step to login to the 2Wire 2701HGV-W router is to make sure you're connected to it via wireless connection or cable connection. Once you've connected to your router, you need to access the 2Wire 2701HGV-W router's settings interface through your web browser.

Open the browser and copy the IP address of your 2Wire 2701HGV-W router into the address bar of your web browser and press Enter.

Default IP Address for 2Wire 2701HGV-W Router:
Default IP Address for 2Wire 2701HGV-W Router:
access router interface setting
Step 2:

Default Username and Password for 2Wire 2701HGV-W Router

If you have successfully completed step one, a dialog box will appear asking you for a 2Wire 2701HGV-W Router’s username and password. Copy and paste the default username and password below in the dialog box.

Default Username for 2Wire 2701HGV-W Router: blank
Default Password for 2Wire 2701HGV-W Router: blank
Default Username for 2Wire 2701HGV-W Router: blank
Default Password for 2Wire 2701HGV-W Router: user
access router interface setting

Problems with 2Wire 2701HGV-W login

2Wire 2701HGV-W IP address does not work

If you cannot login to the 2Wire 2701HGV-W router with the IP address above, make sure you are connected to it using a wireless connection or a cable connection and if everything is fine, make sure the physical connection is alright by checking the non-flashing device's lights. If you do not see non-flashing lights, make sure that each cable is properly plugged. It is also important to check if the cables are broken or folded. Try using another cable or other device port if possible. If the computer is off, the connection light may not turn on.

2Wire 2701HGV-W Password does not work

If the password does not work, you need to reset your router to the factory settings of 2Wire 2701HGV-W.

Forgotten password of 2Wire 2701HGV-W Router

If you have changed your password and cannot remember it, you need to reset the 2Wire 2701HGV-W router to the factory settings. To reset the router to the factory settings, follow our "How to reset the 2Wire 2701HGV-W Router" guide.

When is resetting of the 2Wire 2701HGV-W router needed?

  • 1. When you can not access the router by IP address or your username and password do not match.
  • 2. When you want to remove all previously configured settings.
  • 3. When the router does not work as you expect.

Positioning the 2Wire 2701HGV-W router

Positioning your wireless router

For the best wireless signal transmission between the wireless router and the network devices connected to it, ensure that you:

  • * Place the wireless router in a centralized area for a maximum wireless coverage for the network devices.
  • * Keep the device away from metal obstructions and away from direct sunlight.
  • * Keep the device away from 802.11g or 20MHz only Wi-Fi devices, 2.4GHz computer peripherals, Bluetooth devices, cordless phones, transformers, heavy-duty motors, fluorescent lights, microwave ovens, refrigerators, and other industrial equipment to prevent signal interference or loss.
  • * For the best front-to-rear coverage, place the wireless router in an upright position.
  • * For the best up-and-down coverage, place the 2Wire 2701HGV-W in an inclined position.

How to protect your 2Wire 2701HGV-W router

You are probably familiar with the common "90 day rule" for passwords. The rule is: change your password every 90 days or less. It's a security best practice that will safe your 2Wire 2701HGV-W router from hackers and nosy neighbours :)

Why you need to reboot a 2Wire 2701HGV-W router

Turning off the power from the 2Wire 2701HGV-W router and turning it on again is known as restarting. Restarting the router will not give you higher internet speed but can improve speed in some cases. The 2Wire 2701HGV-W router have software that performs the operation. Just as you may need to restart your computer because it is running slowly, the same goes for the router.