How to reset BEC Technologies 5200W Router

Here you will find how to reset the BEC Technologies 5200W router.

  1. BEC Technologies 5200W Router
  2. Login to BEC Technologies 5200W Router
  3. Manual for BEC Technologies 5200W Router
  4. BEC Technologies 5200W Factory Settings

When is resetting of the BEC Technologies 5200W router needed?

  • 1. When you can not access the router by IP address or your username and password do not match.
  • 2. When you want to remove all previously configured settings.
  • 3. When the router does not work as you expect.

Reset the BEC Technologies 5200W router

The reset button is located on the back of the router. Use a sharp tool eg. paperclip or a pen to press the button. Press and hold the button for 20 seconds, the router will restart and reset to the factory settings.

Note! After BEC Technologies 5200W has been reset, all settings that apply to the connection and the network must be reconfigured. After resetting, the router will restart. On initial start-up, the factory settings are recharged and the computer loses connection to the router for about 30 seconds. You can then login the setup interface of the BEC Technologies 5200W router and reconfigure the network.

Resetting the BEC Technologies 5200W router problems

If resetting the router has failed, you probably did not hold the reset button for long enough, try again.

Security of BEC Technologies 5200W after reset

Change the BEC Technologies 5200W Default Password

After resetting the BEC Technologies 5200W router, the device receives a predefined password from the manufacturer known to everyone and written on the device’s box. Hackers know this and always try to access your network with these predefined passwords. All Security Professionals recommend you to change the default password immediately after resetting the BEC Technologies 5200W router.

Change BEC Technologies 5200W Default IP Address

After resetting the BEC Technologies 5200W, the router receives the first possible address (, change it to or something similar that you can easily remember, if possible. You can change the IP addresses that are used to a group reserved for private networks. This will protect your BEC Technologies 5200W router from malicious actions (cross-site request forgery CSRF) that most often attack through the user's browser and try to get to the router by using IP addresse set as default.

Change BEC Technologies 5200W SSID (Wifi name)

After resetting BEC Technologies, the router receives the SSID (Wifi name) by default. These predefined names from the manufacturer are known and limited in number, enabling scanning for them to be quickly and easily detect the network and its parameters when match. You must change the network name immediately after resetting the device, also the regular replacement makes it difficult to identify the network and protects from a subsequent attack.