Peplink Balance_One Router

  1. Login to Peplink Balance_One Router
  2. Manual for Peplink Balance_One Router
  3. Reset Peplink Balance_One Router
  4. Peplink Balance_One Factory Settings

How to login to the Peplink Balance_One router interface

To login the router with the preconfigured default data, follow the guide to Peplink Balance_One login.

User’s manual for Peplink Balance_One Router

Quick and easy solutions to your Peplink Balance_One router problems can be found in the user's manual.

How to reset the Peplink Balance_One router to the factory settings

If the router does not work the way you want, you can not access the router by IP address or the username and password do not match, you will probably need to reset it, following the Peplink Balance_One reset instructions.

Default settings for the Peplink Balance_One router

The router's default settings are those which the router possess at it’s first launch. They include an IP address, username and password. This data will be required, if you apply a reset the Peplink Balance_One to factory settings.

How to Protect Your Peplink Balance_One Router

Change the Peplink Balance_One Default Password

Most Peplink routers come with an elementary password known to everyone and written on the device's box. Hackers know this and always try to access your network with these preconfigured passwords. So when you first connect to you new Peplink Balance_One router’s interface, the most important thing is to change your initial password. You may not have to use this password often, so be sure to have it written in a safe place. Without it, the only way to access the router may be to reset the device’s factory settings.

Change Peplink Balance_One Default IP Address

The routers take the first possible address (192.168.0.1), change it to 192.168.0.99 or something similar to that, which you can easily remember. You can change the IP addresses, that are used to a group reserved for private networks. This will protect your Peplink Balance_One router from attacks by fake requests (cross-site request forgery CSRF), that most often attack through the user's browser and try to access the router by using IP addresses set as default.

Change Peplink Balance_One SSID (Wifi name)

Most Peplink routers have the default SSID. These names are known and limited in number, enabling to scan quickly and easily for them, and to easily detect the network and its parameters if there is a match. The initial replacement of the network name, as well as regular replacement, make it difficult to identify the network easily and a also make it difficult for a subsequent attack.

Position the Peplink Balance_One in a good place

Position your router near where you spend the most time on the web.
A few tips for positioning the Peplink Balance_One router:

- Place the router close to the center of your home.
- Do not put it on the floor but on a desk, table or shelf.
- Do not place it in the immediate vicinity of a wall that will take the signal.
- Do not place it near other devices that emit wireless frequencies, such as microwave ovens or wireless phones.

If your router has external antennas, you need to be sure that they are pointing in the right direction to optimize range and performance.